
Overcrank Motorised Shearing Machine
Our range of Overcrank Motorised Shearing Machine is capable of performing as per industrial standards. This class of machines has been well tested for performance under stringent industrial conditions. We use high grade raw materials for making these machines. These machine can be availed at cost-effective prices.
- Specification
- Features
- Standard Accessories
Power Supply : 440 Volts / 360 Volts / 220 Volts, 3 Phase, 50 Cycles / 60 Cycles
Model | Cutting Cap in MS length x thickness |
Depth of Throat (MM) | Strokes per Min | Table Height (MM) | Table Width (MM) | Front Gauge | Rear Gauge | Motor (HP/KW) | Blade Length x Width x Thick | Overall Dimensions (MM) | ||
Length A |
Breadth B |
Height C |
||||||||||
AMT-1 | 1270 x 6 | 80 | 30 | 770 | 450 | 600 | 750 | 7.5/5.6 | 1270 x 75 x 18 | 2250 | 1950 | 2300 |
AMT-2 | 1525 x 6 | 80 | 30 | 770 | 450 | 600 | 750 | 7.5/5.6 | 1525 x 75 x 18 | 2500 | 1950 | 2300 |
AMT-3 | 2030 x 6 | 80 | 30 | 770 | 450 | 600 | 750 | 10/7.7 | 2030 x 75 x 18 | 3000 | 1950 | 2300 |
AMT-4 | 2540 x 6 | 80 | 30 | 770 | 450 | 600 | 750 | 10/7.7 | 2540 x 75 x 18 | 3550 | 1950 | 2300 |
AMT-5 | 3125 x 6 | 80 | 30 | 770 | 450 | 600 | 750 | 15/11.2 | 3125 x 75 x 18 | 4100 | 1950 | 2400 |
AMT-6 | 1270 x 8 | 80 | 30 | 770 | 450 | 600 | 750 | 10/7.7 | 1270 x 75 x 18 | 2350 | 1950 | 2300 |
AMT-7 | 1525 x 8 | 80 | 30 | 770 | 450 | 600 | 750 | 10/7.7 | 1525 x 75 x 18 | 2570 | 1950 | 2300 |
AMT-8 | 2030 x 8 | 80 | 25 | 800 | 450 | 600 | 750 | 12.5/9.7 | 2030 x 75 x 18 | 3150 | 1950 | 2500 |
AMT-9 | 2540 x 8 | 80 | 25 | 800 | 450 | 600 | 750 | 15/11.2 | 2540 x 75 x 18 | 3670 | 1950 | 2500 |
AMT-10 | 3125 x 8 | 80 | 25 | 800 | 450 | 600 | 750 | 20/15 | 3125 x 90 x 18 | 4250 | 1950 | 2600 |
AMT-11 | 1270 x 10 | 80 | 25 | 800 | 450 | 600 | 750 | 12.5/9.7 | 1270 x 90 x 18 | 2400 | 1950 | 2500 |
AMT-12 | 1525 x 10 | 80 | 25 | 800 | 450 | 600 | 750 | 12.5/9.7 | 1525 x 90 x 18 | 1950 | 1950 | 2500 |
AMT-13 | 2030 x 10 | 80 | 25 | 800 | 450 | 600 | 750 | 15/11.2 | 2030 x 90 x 18 | 3200 | 1950 | 2600 |
AMT-14 | 2540 x 10 | 80 | 25 | 800 | 450 | 600 | 750 | 20/15 | 2540 x 100 x 22 | 3700 | 1950 | 2600 |
AMT-15 | 3125 x 10 | 80 | 25 | 800 | 450 | 600 | 750 | 25/18.7 | 3125 x 100 x 22 | 4300 | 1950 | 2600 |
AMT-16 | 1270 x 13 | 80 | 25 | 800 | 450 | 600 | 750 | 15/11.2 | 1270 x 100x 22 | 2480 | 1950 | 2600 |
AMT-17 | 1525 x 13 | 80 | 25 | 800 | 450 | 600 | 750 | 15/11.2 | 1525 x 100 x 22 | 2740 | 1950 | 2600 |
AMT-18 | 2030 x 13 | 80 | 25 | 800 | 450 | 600 | 750 | 20/15 | 2030 x 100 x 22 | 3250 | 1950 | 2600 |
AMT-19 | 2540 x 13 | 80 | 25 | 800 | 450 | 600 | 750 | 25/18.7 | 2540 x 100 x 22 | 3750 | 1950 | 2600 |
AMT-20 | 3125 x 13 | 80 | 25 | 800 | 450 | 600 | 750 | 30/22.5 | 3125 x 100 x 22 | 4350 | 1950 | 2600 |
AMT-21 | 1270 x 16 | 80 | 25 | 800 | 450 | 600 | 750 | 20/15 | 1270 x 100 x 25 | 2690 | 2100 | 3100 |
AMT-22 | 1525 x 16 | 80 | 25 | 800 | 450 | 600 | 750 | 20/15 | 1525 x 100 x 25 | 2950 | 2100 | 3100 |
AMT-23 | 2030 x 16 | 80 | 25 | 800 | 450 | 600 | 750 | 25/18.7 | 2030 x 100 x 25 | 3450 | 2100 | 3100 |
AMT-24 | 2540 x 16 | 80 | 25 | 800 | 450 | 600 | 750 | 30/22.5 | 3540 x 100 x 25 | 3950 | 2200 | 3100 |
AMT-25 | 3125 x 16 | 80 | 25 | 800 | 450 | 600 | 750 | 40/30 | 3125 x 100 x 25 | 4500 | 2200 | 3150 |
Shearing Machines have been designed and developed through structural analysis technique for continuous production, accuracy and repeatability having the following main features :
Frame : Rigid steel frame of shears are optimally designed to avoid week sections at load support and is of interlocked design.The ram is guided throughout its length by accurate machined guide-ways ensuring proper clearance and clean cut.
Hold-down system : Spring loaded mechanical Hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Hold-down system : Hydraulic Hold down pads are accurate calm operated pump. Hydraulic Hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cut. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request at extra cost.
Knives : Shears are provided with high quality single segment (HcHcr) Knives for longer tool elite. Ease in assembling of knife reduces down-time. The knife blades are four edged.
Lubrication : All bearing parts and guide surfaces are lubricated through hand-operated lubrication system.
Mechanical back gauge : This is standard equipment provided on all shears. Scale on back gauge gives instantaneous reading of distance between shear and back gauge. Thus avoiding errors and maintenance encounted in electronic equipment.
Finger guard : Fitted in front of hold-down for operator protection without abstructing viewing.
Back Gauge, Front Gauge with stand, wheel and gear guards, motor pulley, suitable electric motor, 3 phase, 440 volts, starter, V-belts, and One no, Shearing Blade (fitted with machine), Manual Lubrication System.