- Specification
- Features
| Model | Capacity | Wire | Nail Per Minute | H.P. Required H.P, R.P.M. | Net Weight of Machine | Gross Wt. Kg, Approx. | Gross Wt. Kg, Approx. |
| AMT - 1A | 6-25mm 1/4"-1" |
0.9-1.4mm 20-17SWG |
500 - 550 | 1.5 X 1440 | 225 | 300 | 33 x 29 x 32 |
| AMT - 1 | 12-38mm 1/2"-1.1/2" |
1.2-2mm 18-14SWG |
400 - 450 | 1.1/2 X 1440 | 350 | 450 | 33 x 32 x 35 |
| AMT - 2 | 12-50mm 1/2"-2" |
1.6-2.6mm 16-12SWG |
300 - 350 | 2 X 1440 | 500 | 650 | 36 x 37 x 37 |
| AMT - 3 | 20-75mm 3/4"-3" |
2-3.7mm 14-9SWG |
225 - 275 | 3 X 1440 | 850 | 1050 | 47 x 56 x 42 |
| AMT - 4 | 25-100mm 1"-4" |
2.6-4mm 12-8SWG |
175 - 210 | 5 X 1440 | 1200 | 1550 | 52 x 51 x 44 |
| AMT - 5 | 50 - 150mm 2" - 6" |
4 - 6mm 8 - 4SWG |
100 - 125 | 7 X 1440 | 1800 | 2800 | 65 x 72 x 49 |
| AMT - 6 | 50 - 200mm 2" - 8" |
4 - 7mm 8 - 2SWG |
90 - 100 | 10 X 1440 | 2400 | 3400 | 84 x 77 x 54 |
Frame : The frame is of all steel construction, fabricated from Rolled steel plates with suitable cross ribbings.
Clutch : The clutches of pin/rolling key-type. The clutch is rigid and well supported. The clutch gives continuous strokes for mass production.
Crank Shaft : Crank shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life & accuracy.
Gears : Gears are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine.
Flywheel : Properly sized flywheel is made of high grade cast iron, for storing and releasing adequate energy for the pressing operations, and properly balanced for smooth running.
Lubrication : An efficient shot lubrication system has been provided for lubricating the sliding surfaces and moving parts. The lubricant is applied by hand pump.
Table & Ram : Table and Ram are made of high grade heavy duty cast iron & properly seasoned. They are perfectly aligned, to each other to obtain high accuracy & precision press operation.